Replacement Light Fixture - Electrical - DIY Chatroom - DIY Home ...

Yesterday, 09:49 PM	? #1
Newbie ? Join Date: Oct 2011 Posts: 7	I have ZERO experience with electricity and also just bought a new house and have ZERO money for a professional. I replaced a simple pull chain, medium base, porcelain lampholder and it will not work. The original fixture was coming apart and the pull chain had fallen out. I got a $5 replacement from walmart and followed the instructions (killed the breaker, black wire to copper terminal, white wire to silver terminal) and now it won't work (yes...I flipped the breaker back on). Please help!
?

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. DIYChatroom.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any home improvement task!

Yesterday, 10:01 PM	? #2
Licensed electrician ? Join Date: Sep 2007 Location: Maryland Posts: 2,887	Does the fixture have a pull chain? Does the bulb work in another fixture? __________________ Answers based on the National Electrical Code. Local amendments may apply. Check with your local building officials.
?

Yesterday, 10:09 PM	? #3
Newbie ? Join Date: Oct 2011 Posts: 7	It does have a pull chain, I have tried to turn it on by the pull chain once the wires were connected and the breaker was back on. I tried the bulb in another fixture in the basement and it worked just fine. I also tried connecting a fixture I know to work on the wires (again, one black to the brass-colored terminal, one white to the silver terminal) and it didn't work either. Thanks for replying to my post.
?

Yesterday, 10:15 PM	? #4
Newbie ? Join Date: Oct 2011 Posts: 26	Any chance it's on a switch? Do you have a continuity tester or power tester? Try reversing the wires? I'm not an electrician but I've had my hands in enough wire boxes. Sometimes guys use wire scraps and disregard color codes-although I don't think it matters...
?

Yesterday, 10:16 PM	? #5
Newbie ? Join Date: Oct 2011 Posts: 26	Was there any power there before u turned off the breaker?
?

Yesterday, 10:21 PM	? #6
Licensed electrician ? Join Date: Sep 2007 Location: Maryland Posts: 2,887	The wires were connected to the proper colors. even if they were not the fixture should have worked. It just would not have been to code or as safe as it should have been. __________________ Answers based on the National Electrical Code. Local amendments may apply. Check with your local building officials.
?

Yesterday, 10:27 PM	? #7
Newbie ? Join Date: Oct 2011 Posts: 7	I definitely need to pick up a tester. The fixture worked before I went tinkering around with it, only problem was the pull chain was out and we had to unscrew the bulb to turn it off.
?

Yesterday, 10:30 PM	? #8
Newbie ? Join Date: Oct 2011 Posts: 7	To Jim Port: I tried following the wires to their source (there were multiple wires heading into the box the fixture was attached to that weren't actually doing anything, they were just bunched up inside) but couldn't see where it connected to the box. I have a feeling I MAY need to get a hold of my brother-in-law who is an electrical engineer. I feel this may be over my head.
?

Yesterday, 10:32 PM	? #9
Licensed electrician ? Join Date: Sep 2007 Location: Maryland Posts: 2,887	If you can post a pic someone might see something that you don't. Also check to make sure any wire nuts are tight. You can also check the center tab in the fixture. It might not be touching the bulb base. __________________ Answers based on the National Electrical Code. Local amendments may apply. Check with your local building officials.
?

Today, 12:27 AM	? #11
Newbie ? Join Date: Sep 2011 Posts: 21	In your second and third pics there are two loose wires. Were those disconnected when old fixture was connected? Also you need a romex clamp on wires connected currently to fixture.
?

Today, 07:59 AM	? #12
Licensed electrician ? Join Date: Sep 2007 Location: Maryland Posts: 2,887	Quote: I definitely need to pick up a tester. The fixture worked before I went tinkering around with it, only problem was the pull chain was out and we had to unscrew the bulb to turn it off. Is the current fixture hooked up exactly as the old one was? If you install the old one again does it work? Just trying to narrow this down without any test equipment is a little tougher. __________________ Answers based on the National Electrical Code. Local amendments may apply. Check with your local building officials.
?

Today, 07:05 PM	? #13
Newbie ? Join Date: Oct 2011 Posts: 7	Thestig3: You're right, I do need a romex clamp...thanks for the heads up. The wires hanging down were not connected to the old, working fixture. They seem to be old wires that were just never taken out but I can't tell where they are coming from. Need to get a tester and remove them asap.
?

Today, 07:09 PM	? #14
Newbie ? Join Date: Oct 2011 Posts: 7	Jim Port: The current fixture is installed EXACTLY as the old one was. The old fixture's negative terminal fell off during the removal process. However, I was able to remove another fixture in the basement that I know to work (call it fixture 2, with the fixture I have taken photos of is fixture 1) and connect it to fixture 1 without it working, then reconnected fixture 2 to its original line and it works just fine. In other words, it does not appear that its the fixture at fault, more the wiring. But again...I am far too novice to know what I'm talking about.
?

Today, 07:29 PM	? #15
Licensed electrician ? Join Date: Sep 2007 Location: Maryland Posts: 2,887	Can you tell where the newer cable goes after it leaves the box? __________________ Answers based on the National Electrical Code. Local amendments may apply. Check with your local building officials.
?

Source: http://www.diychatroom.com/f18/replacement-light-fixture-119848/

monopoly alaska kinesiology sleep albuquerque college football scores dish tv